Replacement Whitening Tip for LX 16 Plus / D-Laser Blue, 1/Pk

The Whitening Tip is specifically designed for professional dental whitening laser treatments. It delivers precise laser energy to activate bleaching agents applied to teeth surfaces. This tip is part of the device's suite for cosmetic dental procedures and ensures even whitening results.

How to Use the Whitening Tip

1. Preparation:

• Connect the whitening tip to the handpiece by rotating it clockwise until securely attached.
• Apply a laser-compatible bleaching gel (such as TiO2-based gel) to the surface of the teeth being treated.

2. Laser Setup:

Select the Teeth Whitening preset program on the device interface.

3. Application Procedure:

• Position the whitening tip close to the tooth surface covered with gel.
• Radiate each tooth for 30 seconds, ensuring even coverage of the area.
• Allow the gel to rest for 1 minute to maximize its activation.
• Repeat the above steps up to four cycles per tooth. Avoid exceeding 6 minutes of total treatment time.

4. Monitoring:

• Regularly check the patient's comfort during the procedure. If the patient experiences pain or heat, stop and assess the laser settings.

5. Aftercare:

• After completing the whitening process, remove the whitening tip by rotating it counterclockwise.
• Clean the whitening tip as per the manufacturer's sterilization and disinfection guidelines if it is reusable.

Important Notes

• The Whitening Tip is used exclusively for dental whitening procedures and should be handled with care to avoid damage.
• Protective goggles must be worn by the operator, assistants, and the patient to prevent laser exposure injuries.
• Always test the aiming beam and ensure proper setup before starting the procedure.

Here are some videos for your viewing. Enjoy!