Share E-mail Copy link
Woodpecker / DTE Curing Light / I LED II
Woodpecker / DTE Curing Light / I LED II
Click to open expanded view

Woodpecker / DTE Curing Light / I LED II

SKU: CUR-LIG-ILE
Price
$278
Taxes and shipping calculated at checkout
Woodpecker / DTE Curing Light / I LED II

Stock Notification

Get notified when this product is available again
Specifications

Power input: 100V to 240V, 50Hz/60 Hz

Power output: DC5V/1A

Battery: 18500, 3.7V/ 2000mAh

Wave length: 385nm-515nm

Light intensity: 1000 -3000mW/cm2

Illumination range: 8mm-10mm

Dimension: 1”×1”×9.5” (25×25×240mm)

Net weight: 0.6lb (278g)

Package: 1pc/box, 20boxes/ctn

Packing List
  1. Main unit x 1
  2. Light hood x 1
  3. Bathymeter x 1
  4. Adapter x 1
  5. Charging base x 1
  6. Disposable sleeves x 100
  7. Qualified certificate x 1
  8. Instruction manual x 1
  9. Warranty card x 1
Warranty

I) Period validity:
We offer two years on the device, one year on the battery , excluding the light guide and light hood.
II) Range of warranty:
Within the warranty period of validity, we are responsible for any troubles caused by quality problems or products technique and structure.
III) The following are beyond our warranty:

  • The damage caused by disobeying the operation instruction or lack of the needed conditions.
  • The damage caused by unsuitable operation or disassembly without authorization.
  • The damage caused by unadvisable transportation or preservation.
  • There isn’t the seal of distributor, or the warranty card isn’t filled in completed.
  • The warranty is not including optical fiber and light hood.

Share this product

Share E-mail

The Woodpecker iLed II Dental Curing Light combines cutting-edge technology and ergonomic design to provide unmatched efficiency and precision for dental curing. Designed with advanced light output and versatility, the Woodpecker iLed II is the ultimate tool for modern dental practices.

Key Features

1. Upgraded Focused Light Output

Unique Woodpecker technology reduces the light angle by 55.87%, delivering concentrated energy for faster and more effective curing.

2. High-Intensity Curing

Offers a maximum intensity of 3000 mW/cm², curing 2mm of resin in just 1 second. Ideal for orthodontic brackets, porcelain veneers, and post-core adhesives.

3. Magnetic Point Cure Lens

Provides pinpoint curing for small composites and tack curing for veneers and porcelain crowns, ensuring precision in every application.

4. Wide Spectrum Compatibility (385nm–515nm)

Compatible with both traditional and new photoinitiator resin materials, such as TPO, reducing the risk of incomplete curing and resin shedding.

5. Three Working Modes

  • Turbo Mode (P0): High power (2700–3000 mW/cm²) with 1- and 3-second settings.
  • High Mode (P1): Moderate power (1800–2000 mW/cm²) with 3- and 5-second settings.
  • Normal Mode (P2): Standard curing (1000–1200 mW/cm²) with 5-, 10-, 15-, and 20-second settings.

6. Ergonomic and Durable Design

Sleek fluid design with a 360-degree rotating head ensures easy access to all areas.

Durable construction with an anti-shock metal head that resists cracking and damage.

7. Constant Power Output

Maintains consistent curing performance, even as battery power depletes.

8. Long-Lasting Battery Life

Equipped with a reliable rechargeable battery, offering hours of uninterrupted use.

Applications

  • Orthodontic Brackets: Fast curing for efficient workflow.
  • Porcelain Veneers and Crowns: Tack curing ensures perfect adhesion.
  • Post-Core Adhesives and Sealants: High penetration and bonding strength.
  • General Restorations: Compatible with a wide range of resin materials.

   

Here are some videos for your viewing. Enjoy!

i Led II Introduction Video

i LED II Catalogue

i LED II User Manual

General Use

1. How do I select different power modes on the i LED II curing light?

  • Press the "Mode Change" button to cycle through three power modes:
  • Turbo Power Mode (P0): 2700-3000 mW/cm² for 1-3 seconds.
  • High Power Mode (P1): 1800-2000 mW/cm² for 3-5 seconds.
  • Standard Power Mode (P2): 1000-1200 mW/cm² for 5-20 seconds.

2. How long should I cure composite materials?

  • For a 2mm composite layer, the recommended curing times are:
  • Standard Power: 1×10 seconds.
  • High Power: 2×3 seconds.
  • Turbo Power: 1×3 seconds.

3. How do I know when to recharge the unit?

  • The screen will start to "wink" when the battery is low. Connect the curing light to the charger promptly to avoid shutdown.

Cleaning and Disinfection

4. How should I clean the i LED II curing light?

Before each use, wipe the device surface with a soft cloth or paper towel soaked in 75% medical alcohol. After use, clean with distilled or deionized water using a clean soft cloth.

5. How do I clean and sterilize the point cure lens?

Clean with distilled water or deionized water, and disinfect using an automated washer-disinfector. Do not expose the lens to temperatures above 138°C, and do not use strong acidic or alkaline cleaning agents.

6. How often should I sterilize the optical fiber?

The optical fiber can be sterilized up to 500 times. Ensure thorough cleaning and disinfection before sterilization.

Troubleshooting

7. The screen displays “Er” or is unresponsive. What should I do?

This could indicate a system error or a faulty unit. Send the device for service and repair.

8. What should I do if the curing light doesn’t charge?

Check that the adapter is connected properly. If the issue persists, ensure the adapter is compatible with the device or send it for repair.

9. The light intensity is weak. How can I fix this?

Clean any resin buildup on the top of the main unit, as this could reduce the light's effectiveness.

Daily Maintenance

10. How often should the i LED II curing light be maintained?

Monthly maintenance is recommended. However, the disposable sleeve is single-use and requires no maintenance.

11. What precautions should I take if I won’t use the device for an extended period?

Charge the battery every six months to prevent damage caused by long-term storage.

Operation and Features

12. How do I stop the curing light mid-cycle?

Press the power button at any time to stop the blue light during operation.

13. What happens if the curing light overheats?

If the device becomes too hot, stop operation and allow it to cool before restarting. It is recommended to avoid using the curing light continuously for more than 10 cycles.

14. Can I rotate the top of the curing light?

Yes, the top can rotate 360 degrees, but it should not be forcibly removed.

Compare with similar items

Woodpecker / DTE Curing Light / I LED II
This item Woodpecker / DTE Curing Light / I LED II
Woodpecker / DTE Curing Light / O-Light
Woodpecker / DTE Curing Light / O-Light
Woodpecker Curing Light / O-Light Max
Woodpecker Curing Light / O-Light Max
Woodpecker / DTE Curing Light / O-Star
Woodpecker / DTE Curing Light / O-Star
Battery
2000mAh
1400mAh
1400mAh
2000mAh
Weight
278 g
259 g
259 g
108 g
Dimensions
25 × 25 × 240 mm
268.8 × 26.1 × 31.8 mm
268.8 × 26.1 × 31.8 mm
204 × 23 × 23 mm
Working Modes
3 (Turbo, High, Standard)
2 (Turbo, Normal)
2 (Turbo, Normal)
7 (Normal, High, Turbo, Ortho, Soft, Pulse, Check)
Illumination Range
8-10mm
8mm
8-10mm
8-10mm
Light Intensity
1000-3000mW/cm²
1000-2500mW/cm²
1000-2500mW/cm²
1000-3000mW/cm²
Wavelength
385-515nm
420-480nm
385-515nm
385-515nm
Head Material
Metal
Plastic
Metal
Metal
Body Material
Metal
Ergonomic plastic body
Ergonomic plastic body
Metal
Display
LED
LED
LED
OLED
Head Rotation
360°
360°
360°
360°
Special Features
Full Metal body and head
curing 2mm resin in just 1 second
wide spectrum 385 nm to 515 nm
Charging base with Built-in Light Meter
Price
$278.00
$254.00
$254.00
$749.00